New Plant Products

RSS

Domnick Hunter’s Maxigas nitrogen gas generators employ the pressure swing adsorption method of non-cryogenic gas generation, utilizing plant compressed air that is filtered and dried through a dessicant air dryer and then passed through a carbon molecular sieve (CMS) bed.

Sartorius’ X3 process indicator provides control of process hopper scales with strain gauge load cells for use in process automation applications.

Mettler-Toledo’s SWS310 tension weigh module converts any suspended hopper or vessel into a scale.

Suitable for tamper-evident and promotional applications, Ameri-Seal’s heat shrinkable labels and sleeves can be printed on up to nine colors.

An environmentally friendly solution for producing fine chocolates, Netzsch’s Chocoeasy has an agitator bead mill that eliminates shearing problems and reduces power usage.

Strong and durable, Vector plastic casings have a barrier film structure that improves freshness and extends shelf life for meat, poultry and dairy products.

Installed on pump drains, Hedland direct-reading flow meters monitor excess case drain flow.

Markem’s CoLOS software upgrade is a suite of fully integrated coding and labeling solutions, including networked hardware and support, for centralized image data and control over the entire coding process.

Heatcraft’s EC motor is up to 85% efficient, with test data showing a 51-60% increase over shaded pole motors and a 30-40% increase over permanent-split capacitor motors.

Tharo’s PA1200DT dual tamp label printer/applicator can print and apply labels to two adjacent carton/product surfaces.